UL 3458

零售价

市场价

重量

数量

库存

加入购物车

立即购买

隐藏域元素占位

UL 3458

所属分类：

UL电线

DOWNLOAD

产品详情

商品名称: UL 3458

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3458
                        
                            Issued:1982-12-02
                    
                            Revised:2011-10-28
                    
                            Style
                            3458
                        
                            Multiconductor cable with extruded non-integral jacket
                    
			Rating80 deg C, 30 Vac, VW-1 flame.
		
			Conductor40 AWG minimum, material not specified.
		
			InsulationSolid or Cellular XLPE, 4 mils min. at any point, 100 mils maximum
		
			AssemblyInsulated conductor is built with inner covering, middle covering, and outer covering.
		
			ShieldOptional.
		
			CoveringInner Covering - (Optional) 2 mils min. at any point extruded PVC, Polyamide, Polyester, PVDF, ETFE, Irradiated P.E. or F.R.P.E., or Lacquered Braids; Middle Covering - (Optional) 2 mils min. at any point extruded PVC, Irradiated F.R.P.E., polyester, Polyamide, PVDF, ETFE or Lacquered braid, or spiral wrap PETP tape with polyester adhesive 0.5 mil min at any point; Outer Covering - (Optional) PVC, 5 mils min. at any point, 40 mils max. Irradiation optional.
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. VW-1 on both insulated conductor and jacket.
		
			UseWiring of Low Energy Non-Hazardous Circuits in Audio and Video Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2023

返回列表

UL 3459

UL 3454

关注我们

营业执照

849059381 真诚为您提供专业解答服务

电话

0512-57274066 7*24小时服务热线

顶部

Subj.758	Section 3	Page 3458	Issued:1982-12-02
			Revised:2011-10-28


Rating	80 deg C, 30 Vac, VW-1 flame.

Conductor	40 AWG minimum, material not specified.

Insulation	Solid or Cellular XLPE, 4 mils min. at any point, 100 mils maximum

Assembly	Insulated conductor is built with inner covering, middle covering, and outer covering.

Shield	Optional.

Covering	Inner Covering - (Optional) 2 mils min. at any point extruded PVC, Polyamide, Polyester, PVDF, ETFE, Irradiated P.E. or F.R.P.E., or Lacquered Braids; Middle Covering - (Optional) 2 mils min. at any point extruded PVC, Irradiated F.R.P.E., polyester, Polyamide, PVDF, ETFE or Lacquered braid, or spiral wrap PETP tape with polyester adhesive 0.5 mil min at any point; Outer Covering - (Optional) PVC, 5 mils min. at any point, 40 mils max. Irradiation optional.

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General. VW-1 on both insulated conductor and jacket.

Use	Wiring of Low Energy Non-Hazardous Circuits in Audio and Video Equipment.